To connect your uAccept POS device, follow these steps:


1. Remove the back cover of the device. (A)


2. Attach the power cord to the device. (B)


3. Plug the power cord into a surge protector, then plug the surge protector into the power outlet.


4. Plug the Ethernet cable into the device (C), then plug the Ethernet cable into your wired router.


5. Plug the cash drawer line cord into the device (D), then plug the line cord into the bottom of the uAccept cash drawer.


6. Press and hold the Power button (E), found on the right side of the device, until the uAccept startup screen appears.



NOTE: We strongly suggest that you use a surge protector or uninterruptible power supply (UPS). If a surge protector is not used and there is a power surge, your warranty may become void.