There are two ways to connect your Citadel time clock to the Internet—via WI-FI or Ethernet. Both sets of instructions are listed below.

Connecting via WI-FI


To connect your time clock via a WI-FI, follow these steps:


  1. Access the admin menu (enter pin number 253928)

  2. Select time clock management.


  3. Select network settings.



  4. Select WI-FI.



  5. A list of all WI-FI networks that the time clock detects will appear.



  6. Select the WI-FI network you want to connect to.

  7. If your WIFI network requires a password, enter the password.







  8. Tap join and the time clock will connect to your WIFI network using the credentials you supplied.

  9. You will receive a success notification once you are connected.




 

Connecting via Ethernet


To connect your Citadel time clock via ethernet, follow these steps:

  1. Access the admin menu (enter pin number 253928)

  2. Select time clock management.


  3. Select network settings.



  4. Select ethernet.



  5. If the time clock has not connected via ethernet yet, the clock will display instructions. Plug in your ethernet cable in the ethernet port located in the back of your time clock if you haven't yet.



  6. Once the ethernet connection is established, you will see a success notification. This can take a few moments.